vs-30.pf0.pbf series, vs-30.pf0.-m3 series www.vishay.com vishay semiconductors revision: 11-feb-16 1 document number: 93693 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fast soft recovery r ectifier diode, 30 a features ? glass passivated pellet chip junction ? 150 c max. operating junction temperature ? low forward voltage drop and short reverse recovery time ? designed and qualified according to jedec ? -jesd 47 ? material categorization: ? for definitions of compliance please see www.vishay.com/doc?99912 applications these devices are intended for use in output rectification and freewheeling in inverters, choppers and converters as well as in input rectification where severe restrictions on conducted emi should be met. description the vs-30epf0... and vs-30apf0. .. soft recovery rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. the glass passivation ensures st able reliable operation in the most severe te mperature and power cycling conditions. product summary package to-247ac modified (2 pins), to-247ac i f(av) 30 a v r 200 v, 400 v, 600 v v f at i f 1.41 v i fsm 320 a t rr 60 ns t j max. 150 c diode variation single die snap factor 0.6 to-247ac modified to-247ac 1 2 3 1 2 3 v s - 3 0apf0... v s - 3 0epf0... 2 1 3 cathode anode ba s e cathode 2 anode 1 anode 3 ba s e cathode available major ratings and characteristics symbol characteristics values units i f(av) sinusoidal wa veform 30 a v rrm 200 to 600 v i fsm 320 a v f 10 a, t j = 25 c 1.2 v t rr 1 a, 100 a/s 60 ns t j -40 to +150 c voltage ratings part number v rrm , maximum peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm at 150 c ma vs-30epf02pbf, vs-30apf02pbf ? vs-30epf02-m3, vs-30apf02-m3 200 300 5 vs-30epf04pbf, vs-30apf04pbf ? VS-30EPF04-M3, vs-30apf04-m3 400 500 vs-30epf06pbf, vs-30apf06pbf ? vs-30epf06-m3, vs-30apf06-m3 600 700
vs-30.pf0.pbf series, vs-30.pf0.-m3 series www.vishay.com vishay semiconductors revision: 11-feb-16 2 document number: 93693 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 absolute maximum ratings parameter symbol test conditions values units maximum average forward current i f(av) t c = 98 c, 180 conduction half sine wave 30 a maximum peak one cycle ? non-repetitive surge current i fsm 10 ms sine pulse, rated v rrm applied 270 10 ms sine pulse, no voltage reapplied 320 maximum i 2 t for fusing i 2 t 10 ms sine pulse, rated v rrm applied 365 a 2 s 10 ms sine pulse, no voltage reapplied 515 maximum i 2 ? t for fusing i 2 ? t t = 0.1 ms to 10 ms, no voltage reapplied 5150 a 2 ? s electrical specifications parameter symbol test conditions values units maximum forward voltage drop v fm 30 a, t j = 25 c 1.41 v forward slope resistance r t t j = 150 c 12.5 m ? threshold voltage v f(to) 0.9 v maximum reverse leakage current i rm t j = 25 c v r = rated v rrm 0.1 ma t j = 150 c 5.0 recovery characteristics parameter symbol test conditions values units reverse recovery time t rr i f at 20 a pk ? 100 a/s ? 25 c 160 ns reverse recovery current i rr 10 a reverse recovery charge q rr 1.25 c snap factor s typical 0.6 thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage ? temperature range t j , t stg -40 to +150 c maximum thermal resistance, ? junction to case r thjc dc operation 0.8 c/w maximum thermal resistance, ? junction to ambient r thja 40 maximum thermal resistance, ? case to heatsink r thcs mounting surface, smooth and greased 0.2 approximate weight 6g 0.21 oz. mounting torque minimum 6 (5) kgf cm (lbf in) maximum 12 (10) marking device case style to -247ac modified 30epf02 30epf04 30epf06 case style to-247ac 30apf02 30apf04 30apf06 i fm t rr dir dt i rm(rec) q rr t t a t b
vs-30.pf0.pbf series, vs-30.pf0.-m3 series www.vishay.com vishay semiconductors revision: 11-feb-16 3 document number: 93693 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - current rati ng characteristics fig. 2 - current rati ng characteristics fig. 3 - forward power loss characteristics fig. 4 - forward power loss characteristics fig. 5 - maximum non-re petitive surge current fig. 6 - maximum non-re petitive surge current 150 0 maximum allowable case temperature (c) average forward current (a) 5 100 10 35 120 130 110 15 25 140 90 30 20 30 60 90 120 180 conduction angle 30.pf.. series r thjc (dc) = 0.8 k/w ? 150 030 maximum allowable case temperature (c) average forward current (a) 15 540 110 50 120 90 10 20 130 140 30.pf.. series r thjc (dc) = 0.8 k/w ? conduction period 30 60 90 120 180 dc 100 45 35 25 10 0 35 0 maximum average forward power loss (w) average forward current (a) 20 25 25 30 20 10 15 5 5 15 conduction angle 30.pf.. series t j = 150 c rms limit 180 120 90 60 30 ? 10 0 45 0 maximum average forward power loss (w) average forward current (a) 25 35 15 10 25 5 15 5 20 35 20 30 40 30 rms limit ? conduction period 30.pf.. series t j = 150 c 180 120 90 60 30 dc peak half sine wave forward current (a) number of equal amplitude half cycle current pulses (n) 1 10 100 60 80 100 120 140 160 180 200 220 240 260 280 300 v s -30.pf.. s erie s at any rated load condition and with rated v rrm applied following s urge. initial t j = 150 c at 60 hz 0.0083 s at 50 hz 0.0100 s peak half sine wave forward current (a) pulse train duration (s) 0.01 0.1 1 10 0 50 100 150 200 250 300 350 v s -30.pf.. s erie s maximum non-repetitive s urge current ver s u s pul s e train duration. initial t j = 150 c no voltage reapplied rated v rrm reapplied
vs-30.pf0.pbf series, vs-30.pf0.-m3 series www.vishay.com vishay semiconductors revision: 11-feb-16 4 document number: 93693 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - forward voltage drop characteristics fig. 8 - recovery time characteristics, t j = 25 c fig. 9 - recovery time characteristics, t j = 150 c fig. 10 - recovery charge characteristics, t j = 25 c fig. 11 - recovery charge characteristics, t j = 150 c 1000 10 1 024 instantaneous forward current (a) instantaneous forward voltage (v) 100 5 13 t j = 25 c t j = 150 c 30.pf.. series 0.20 0 0 200 400 800 1000 t rr - typical reverse recovery time (s) di/dt - rate of fall of forward current (a/s) 0.10 0.05 0.15 600 30.pf.. series t j = 25 c i fm = 10 a i fm = 5 a i fm = 1 a i fm = 30 a i fm = 20 a 0.5 0 0 200 400 600 1000 t rr - typical reverse recovery time (s) di/dt - rate of fall of forward current (a/s) 0.2 0.3 0.1 0.4 800 30.pf.. series t j = 150 c i fm = 30 a i fm = 1 a i fm = 20 a i fm = 10 a i fm = 5 a 4.0 0 0 200 400 600 1000 q rr - typical reverse recovery charge (c) di/dt - rate of fall of forward current (a/s) 2.5 1.0 2.0 3.0 3.5 1.5 0.5 800 30.pf.. series t j = 25 c i fm = 30 a i fm = 20 a i fm = 10 a i fm = 5 a i fm = 1 a 0 0 200 400 600 1000 q rr - typical reverse recovery charge (c) di/dt - rate of fall of forward current (a/s) 2 4 6 8 10 800 1 3 5 7 9 30.pf.. series t j = 150 c i fm = 30 a i fm = 20 a i fm = 10 a i fm = 5 a i fm = 1 a
vs-30.pf0.pbf series, vs-30.pf0.-m3 series www.vishay.com vishay semiconductors revision: 11-feb-16 5 document number: 93693 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 12 - recovery curre nt characteristics, t j = 25 c fig. 13 - recovery current characteristics, t j = 150 c fig. 14 - thermal impedance z thjc characteristics 70 0 0 200 400 600 1000 i rr - typical reverse recovery current (a) di/dt - rate of fall of forward current (a/s) 20 50 40 60 10 30 800 30.pf.. series t j = 25 c i fm = 30 a i fm = 20 a i fm = 10 a i fm = 5 a i fm = 1 a 100 40 0 0 200 400 600 1000 i rr - typical reverse recovery current (a) di/dt - rate of fall of forward current (a/s) 80 20 60 800 30.pf.. series t j = 150 c i fm = 30 a i fm = 20 a i fm = 10 a i fm = 5 a i fm = 1 a 0.01 10 1 0.0001 0.001 0.01 0.1 square wave pulse duration (s) z thjc - transient thermal impedance (k/w) 0.1 1 single pulse 30.pf.. series steady state value (dc operation) d = 0.50 d = 0.33 d = 0.25 d = 0.17 d = 0.08
vs-30.pf0.pbf series, vs-30.pf0.-m3 series www.vishay.com vishay semiconductors revision: 11-feb-16 6 document number: 93693 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information table ordering information (example) preferred p/n quantity per t/r minimum order quantity packaging description vs-30epf02pbf 25 500 antistatic plastic tubes vs-30epf02-m3 25 500 antist atic plastic tubes vs-30apf02pbf 25 500 antistatic plastic tubes vs-30apf02-m3 25 500 antistatic plastic tubes vs-30epf04pbf 25 500 antistatic plastic tubes VS-30EPF04-M3 25 500 antist atic plastic tubes vs-30apf04pbf 25 500 antistatic plastic tubes vs-30apf04-m3 25 500 antistatic plastic tubes vs-30epf06pbf 25 500 antistatic plastic tubes vs-30epf06-m3 25 500 antist atic plastic tubes vs-30apf06pbf 25 500 antistatic plastic tubes vs-30apf06-m3 25 500 antistatic plastic tubes links to related documents dimensions to-247ac modified www.vishay.com/doc?95541 to-247ac www.vishay.com/doc?95542 part marking information to-247ac modified pbf www.vishay.com/doc?95255 to-247ac modified -m3 www.vishay.com/doc?95442 to-247ac pbf www.vishay.com/doc?95226 to-247ac -m3 www.vishay.com/doc?95007 02 = 200 v 04 = 400 v 06 = 600 v 2 - current rating (30 = 30 a) 1 - vishay semiconductors product 3 - circuit configuration: e = single diode a = single diode, 3 pins 4 - package: p = to-247ac/to-247ac modified 5 - type of silicon: f = fast recovery 6 - voltage code x 100 = v rrm - environmental digit: 7 pbf = lead (pb)-free and rohs-compliant -m3 = halogen-free, rohs-compliant, and terminations lead (pb)-free device code 5 1 3 2 4 6 7 30 vs- e p f 06 pbf
outline dimensions www.vishay.com vishay semiconductors revision: 21-apr-15 1 document number: 95541 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 to-247 - 50 mils l/f modified dimensions in millimeters and inches notes (1) dimensioning and tolerance per asme y14.5m-1994 (2) contour of slot optional (3) dimension d and e do not include mold flas h. mold flash shall not exceed 0.127 mm (0 .005") per side. these dimensions are measu red at the outermost extremes of the plastic body (4) thermal pad contour optional with dimensions d1 and e1 (5) lead finish unc ontrolled in l1 (6) ? p to have a maximum draft an gle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) outline conforms to jedec ? outline to-247 with exception of dimension c and q symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.65 5.31 0.183 0.209 d2 0.51 1.35 0.020 0.053 a1 2.21 2.59 0.087 0.102 e 15.29 15.87 0.602 0.625 3 a2 1.17 1.37 0.046 0.054 e1 13.46 - 0.53 - b 0.99 1.40 0.039 0.055 e 5.46 bsc 0.215 bsc b1 0.99 1.35 0.039 0.053 ? k 0.254 0.010 b2 1.65 2.39 0.065 0.094 l 14.20 16.10 0.559 0.634 b3 1.65 2.34 0.065 0.092 l1 3.71 4.29 0.146 0.169 b4 2.59 3.43 0.102 0.135 n 7.62 bsc 0.3 b5 2.59 3.38 0.102 0.133 ? p 3.56 3.66 0.14 0.144 c 0.38 0.89 0.015 0.035 ? p1 - 7.39 - 0.291 c1 0.38 0.84 0.015 0.033 q 5.31 5.69 0.209 0.224 d 19.71 20.70 0.776 0.815 3 r 4.52 5.49 0.178 0.216 d1 13.08 - 0.515 - 4 s 5.51 bsc 0.217 bsc e n (2) (3) (4) (4) (2) r/2 b 2 x r s d see view b 2 x e b4 3 x b 2 x b2 l c (5) l1 1 2 3 q d a a2 a a a1 c a (6) ? p (datum b) ? p1 d1 (4) 4 e1 view a - a thermal pad d2 dde e c c view b (b1, b3, b5) base metal c1 (b, b2, b4) section c - c, d - d, e - e (c) plating 0.10 a c m m ? k b d m m
outline dimensions www.vishay.com vishay semiconductors revision: 21-apr-15 1 document number: 95542 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 to-247 - 50 mils l/f dimensions in millimeters and inches notes (1) dimensioning and tolerancing per asme y14.5m-1994 (2) contour of slot optional (3) dimension d and e do not include mold flas h. mold flash shall not exceed 0.127 mm (0 .005") per side. these dimensions are measu red at the outermost extremes of the plastic body (4) thermal pad contour optional with dimensions d1 and e1 (5) lead finish unc ontrolled in l1 (6) ? p to have a maximum draft an gle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) outline conforms to jedec ? outline to-247 with exception of dimension c and q symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.65 5.31 0.183 0.209 d2 0.51 1.35 0.020 0.053 a1 2.21 2.59 0.087 0.102 e 15.29 15.87 0.602 0.625 3 a2 1.17 1.37 0.046 0.054 e1 13.46 - 0.53 - b 0.99 1.40 0.039 0.055 e 5.46 bsc 0.215 bsc b1 0.99 1.35 0.039 0.053 ? k 0.254 0.010 b2 1.65 2.39 0.065 0.094 l 14.20 16.10 0.559 0.634 b3 1.65 2.34 0.065 0.092 l1 3.71 4.29 0.146 0.169 b4 2.59 3.43 0.102 0.135 n 7.62 bsc 0.3 b5 2.59 3.38 0.102 0.133 ? p 3.56 3.66 0.14 0.144 c 0.38 0.89 0.015 0.035 ? p1 - 7.39 - 0.291 c1 0.38 0.84 0.015 0.033 q 5.31 5.69 0.209 0.224 d 19.71 20.70 0.776 0.815 3 r 4.52 5.49 0.178 0.216 d1 13.08 - 0.515 - 4 s 5.51 bsc 0.217 bsc 0.10 a c m m e n (2) (3) (4) (4) (2) r/2 b 2 x r s d see view b 2 x e b4 3 x b 2 x b2 l c (5) l1 1 2 3 q d a a2 a a a1 c ? k b d m m a (6) p (datum b) p1 d1 (4) 4 e1 0.01 b d m m view a - a thermal pad d2 dde e c c view b (b1, b3, b5) base metal c1 (b, b2, b4) section c - c, d - d, e - e (c) plating
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
